Covered corded piping, Multi - purpose foot – Bernina dcet 2500 User Manual
Page 70
1999 BERNINA Of America
Section D - page 10
MULTI - PURPOSE FOOT
C
OVERED
C
ORDED
P
IPING
Feet-ures Unit ___pg.___
Serger Library – Tips and Tricks
Instruction Manual for Multi-Purpose Attachment with Guide
•
Following the directions in the Instruction Manual on page___, thread for a
balanced 4-thread Overlock stitch using the Left and Center Needles.
•
Turn the Stitch Selection Dial to “A”.
•
Set Stitch Length to 3.5.
•
Attach the Multi-Purpose Foot and Guide following the directions in the
Instruction Manual for Multi-Purpose Attachment with Guide.
•
Insert the cord into the guide.
•
Wrap the bias strip around the cord and place the wrapped cord in the groove
under the Presser Foot.
•
Serge the covered cord.
•
Trim and mount the sample.
FABRIC:
Medium weight cotton bias strip 2” X 8”
12” of
3
/
8
” cotton cording
NEEDLES:
80/12
Universal
THREAD:
4 cones of serger thread
PRESSER FOOT: Multi-Purpose Foot with Guide