Bernina dcet 2500 - Manual (Page 46)


1999 BERNINA Of America
Section C - page 8
3THREAD SEAM EDGE FINISH (3m-5mm)
CENTER NEEDLE
Instruction Manual pg._____
Bernette
 Advanced Guide Workbook pg.____
Serger Library – Tips and Tricks
• Thread the serger for a 3-thread Overlock stitch using the Center Needle.
• Turn the Stitch Selection Dial to “A” on the Stitch Display Panel.
• Serge finish one 5” raw edge on each piece of fabric.
• Using your BERNINA sewing machine and a standard 5 /
8
” seam allowance, seam the
two pieces of fabric together along the serged edges.
• Press the seam open.
• Trim and mount the sample.
FABRIC: 2 pieces light weight linen 2½ X 5”
NEEDLES: 80/12 Universal
THREAD: 3 cones of serger thread
PRESSER FOOT: Standard
Wrap the fabric edge with strips of bias cut
tricot or water soluble stabilizer before serging
for added support while stitching.
Use a Center Needle 3-thread Overlock as a
seam finish on light weight woven fabrics.