Bernina dcet 2500 - Manual (Page 50)


1999 BERNINA Of America
Section C - page 12
TURNING TUBES
Feet-ures Unit ____pg.________
Bernette
 Advanced Guide Workbook pg.____
Serger Library – Tips and Tricks
• Thread the serger for a 3-thread Overlock stitch using
the Center Needle.
• Turn the Stitch Selection Dial to “A” on the Stitch
Display Panel.
• Adjust Stitch Length to 2.
• Serge a Thread Chain several inches longer than the
fabric.
• Fold the fabric, right sides together) to 1” X 6” encasing
the Thread Chain against the fold.
• With the folded edge aligned with the left edge of the
Presser Foot, serge the tube being careful not to catch
the Thread Chain in the stitching.
• After stitching the tube, gently pull on the Thread Chain
and turn the tube right side out.
• Mount the sample.
FABRIC: Tricot 2” X 6”
NEEDLES: 75 Stretch or Ballpoint
THREAD: 3 cones of Metrolene serger thread
PRESSER FOOT: Standard