Blind stitch foot – Bernina dcet 2500 User Manual
Page 54
1999 BERNINA Of America
Section C - page 16
BLIND STITCH FOOT
LACE TO LACE
Feet-ures Unit ____pg._________
Instruction Manual for the Blind Stitch Attachment
Bernette
Advanced Guide Workbook pg.____
Serger Library – Simply Serging
•
Thread the serger for a 3-thread Overlock stitch using the Center Needle.
•
Turn the Stitch Selection Dial to “A” on the Stitch Display Panel.
•
Pull the Stitch Selection Lever/Rolled Hem towards you.
•
Adjust the Stitch Length to 1.5.
•
Loosen the Center Needle tension slightly.
•
Attach the Blind Stitch Foot.
•
Move the Fabric Guide just to the right of the Right Needle.
•
Stiffen the lace with Spray Starch or a Fabric Stiffener.
•
With right sides together place the header of the laces under the Presser
Foot and butted up against the Fabric Guide.
•
Serge the laces together.
•
Gently pull the lace flat and press.
•
Trim and mount the sample.
FABRIC:
2 pieces of flat edging lace 6” long
NEEDLES:
70/10 Sharp or Microtex
THREAD:
3 cones of Isacord
PRESSER FOOT: Blind Stitch Foot