Bernina dcet 2500 - Manual (Page 88)


1999 BERNINA Of America
Section E - page 13
ATTACHING BINDING
Instruction Manual pg._____
Feet-ures Unit____pg.________
Cover Stitch Option
• Convert the serger from Overlock to Cover Stitch. Insert the Left and Right Needles
and turn the Stitch Selection Dial to “F”. Set Stitch Length at 3.
• Thread the serger for a wide 3-Thread Cover Stitch.
• Wrap the bias binding around one 6” side of the quilted fabric using 505  Adhesive
Spray to hold the binding in place.
• Place the fabric under the Needles with the unstitched edge of the binding even with
the inside of the Left Floating Toe. The quilted fabric will lay to the left.
• Cover Stitch the binding to the quilted fabric.
Chain Stitch Option
• Thread the serger for a Chain Stitch using the Right Needle. Set the Stitch Selection
Dial to “G”. Set Stitch Length at 3.
• Wrap the bias binding around the other 6” side of the quilted fabric using 505 
Adhesive Spray to hold the binding in place.
• Place the fabric under the Needle with the unstitched edge of the binding even with the
inside of the Right Floating Toe. The quilted fabric will lay to the right.
• Chain Stitch the binding to the quilted fabric.
• Trim and mount the sample.
FABRIC: Prequilted fabric 3” X 6”
20” of wide pre-folded bias binding
NEEDLES: 80/12 universal
THREAD: 2 or 3 cones of serger thread
PRESSER FOOT: Cover Stitch