Thread overlock (5mm-7mm) – Bernina dcet 2500 User Manual
Page 41
1999 BERNINA Of America
Section C - page 3
3-THREAD OVERLOCK (5mm-7mm)
Instruction Manual pg._____
Bernette
Advanced Guide Workbook pg.____
Serger Library – Tips and Tricks
•
Using the Small Screwdriver and Brush/Needle Inserter, remove the Center
Needle.
•
Snug the Needle Set Screw after removing the Needle.
•
Following the diagrams on page ____ in the Instruction Manual, thread the
serger for a 3-thread wide Overlock stitch.
•
Turn the Stitch Selection Dial to “A” on the Stitch Display Panel.
•
Adjust Cutting Width to 2 (normal).
•
Adjust Stitch Length to 2.5 (normal).
•
Fold the fabric in half to 2 ½” X 6”.
•
Serge along the folded edge of the fabric.
•
Trim and mount the sample.
FABRIC:
Medium weight fabric 5” X 6”
NEEDLES:
80/12
Universal
THREAD:
3 cones of serger thread
PRESSER FOOT: Standard