Blind hem, Blind stitch foot – Bernina dcet 2500 User Manual
Page 51
1999 BERNINA Of America
Section C - page 13
BLIND STITCH FOOT
B
LIND
H
EM
Bernette
Advanced Guide Workbook pg.____
Feet-ures Unit ___pg.___
Instruction Manual for Blind Stitch Attachment
•
Thread the serger for a 3-thread Overlock stitch using the Center Needle.
•
Turn the Stitch Selection Dial to “A” on the Stitch Display Panel.
•
Adjust the Stitch Length to 4
•
Attach the Blind Stitch Foot.
•
Following the instructions in the Instruction Manual for Blind Stitch Attachment,
fold the fabric for a 1½” blind hem and place the fabric under the Presser Foot.
•
Adjust the Fabric Guide so that the Needle just catches the fold in the
stitching.
•
Serge the hem, keeping the fold of the fabric against the Fabric Guide.
•
Press the hem.
•
Trim and mount the sample.
FABRIC:
Cotton jersey 5” X 6”
NEEDLES:
80/12
Universal
THREAD:
3 cones of serger thread
PRESSER FOOT: Blind Stitch Foot