Thread super stretch stitch, Fold the lycra in half to 2½” x 6 – Bernina dcet 2500 User Manual
Page 63
1999 BERNINA Of America
Section D - page 3
3-THREAD SUPER STRETCH STITCH
Instruction Manual pg.___
Bernette
Advanced Guide Workbook Supplement I pg.___
Serger Library – Tips and Tricks
•
Attach the Upper Looper Converter – Instruction Manual pg.___.
•
Turn the Stitch Selection Dial to “B” to automatically adjust thread tension.
•
Following the instructions on page ___ of your Instruction Manual, thread
the serger for a Super Stretch Stitch using the Left and Center Needles. Use
Woolly Nylon in the Lower Looper.
•
Adjust Stitch Length at 2.5 (normal).
•
Fold the Lycra in half to 2½” X 6”.
•
Place the fabric under the Presser Foot and serge, cutting off the fold.
•
Trim and mount the sample.
FABRIC:
Cotton or nylon Lycra 5” X 6”
NEEDLES:
80/12 stretch or 11/75 ballpoint
THREAD:
2 cones of serger thread (Needles)
1 cone of Woolly Nylon (Lower Looper)
PRESSER FOOT: Standard