Blind stitch foot – Bernina dcet 2500 User Manual
Page 53
1999 BERNINA Of America
Section C - page 15
BLIND STITCH FOOT
Decorative Tucks
Feet-ures Unit ___pg.___
Bernette
Advanced Guide Workbook pg.___
Serger Library – Additions
•
Thread the serger for a 3-thread Overlock stitch using the Center Needle.
•
Turn the Stitch Selection Dial to “A” on the Stitch Display Panel.
•
Pull the Stitch Selection Lever/Rolled Hem towards you.
•
Adjust the Stitch Length to 1.5.
•
Attach the Blind Stitch Foot.
•
Move the Fabric Guide just to the left of the Knife Line on the Stitch Plate.
•
Stiffen the batiste with Spray Starch or a Fabric Stiffener.
•
Mark 3 lines 1” apart the length of the fabric.
•
Fold the fabric along a marked line and place the fabric under the Presser Foot
so that the fold is against the Fabric Guide. Serge the tucks.
•
Return the Stitch Selection Lever/Rolled Hem to the normal sewing position
(away from you).
•
Trim and mount the sample.
FABRIC:
Batiste 3½” X 6”
NEEDLES:
70/10 Sharp or Microtex
THREAD:
3 cones of Isacord thread
PRESSER FOOT: Blind Stitch Foot