JLG X17J Operator Manual - Manual (Page 105)

If the machine is going to remain unused for a long period, exceeding two days, always
disconnect the power supply and the circuit breaker, and remove the battery from the
radio control.
The battery charger is working when the led on its front is on. The led flashes to indicate that
the battery charge is complete. When the battery is completely charged, remove it from the
battery charger (it is sufficient to remove it from its seat so that its contacts do not coincide
with those of the battery charger) in order to avoid damage due to excessive charge.
The connection cable used to connect the radio control to the receiver can also be used in
the case where the radio signal is disturbed or too weak in the work area; however, this is
possible only for emergency manoeuvres on the machine and not for normal use of the
platform.
X17JR0420113
BOOM LIFT MODELS X17J
JLG
101
IMPORTANTE IMPORTANT