JLG X17J Operator Manual - Manual (Page 136)

7.21.3 R
EPLACING THE BATTERY THERMIC VERSION
‑ Do not disconnect the cables with the engine running.
‑ Before disconnecting the cables, turn the engine key to position OFF.
‑ Disconnect the battery terminals, always starting from the negative pole (‑).
‑ Reconnect the cables, always starting from the positive pole (+).
When the battery cannot accumulate electric energy any longer, replace it with a new one
having the same characteristics.
See the specifications table on the battery.
7.21.4 B ATTERY DISPOSAL
The batteries must be disposed of in compliance with the specific regulations in force.
X17JR0420113 132
BOOM LIFT MODELS X17J
JLG