JLG X17J Operator Manual - Manual (Page 44)

3 SAFETY DEVICES
The information given below concerning the safety devices are provided to the user in order
to allow him/her to understand the machine behaviour and possible work sequences; moreo‑
ver, in this way it is possible to identify any breakdowns with greater precision and to sup‑
ply more detailed information to the after‑sales service for quicker, less expensive interven‑
tions.
The machine is fitted with safety devices used to prevent dangerous situations for the opera‑
tor. It is important that before starting any operation the operator checks the perfect working
order of these devices.
The malfunctioning of a safety device, whether caused by a fault or tampering, can cause
serious damage to the machine and consequently put the operator’s life at risk. The Con‑
structor designed the machine and the safety devices so as to guarantee the maximum safety
to its customers, however the devices must be checked periodically as described in this
manual and they must never be tampered with.
The service function on the radio control can be used as an aid in checking electrical safety
devices.
Never intervene on the safety devices. If they are tampered with the manufacturer declines
all liability regarding any accidents that may be due to such tampering.
It is prohibited to tamper with the lead sealing or setting of the maximum pressure valves
and the adjustments of the electrical components. If they are tampered with, the manufactu‑
rer declines all liability regarding any accidents that may be due to such tampering.
The Constructor is not liable for any damage/injury caused by the machine due to failure to
comply with the above instructions.
X17JR0420113 40
BOOM LIFT MODELS X17J
JLG