JLG X17J Operator Manual - Manual (Page 60)

BUTTON 4:
Used to enable control of the emergency descent from the basket. Confirmation that the ope‑
ration is enabled is displayed on the screen in position 8.
BUTTON 5:
Used to select the travel speed and the engine/motor speed.
There are three speeds available:
•SLOW: engine at 1500 rpm for the operation of the aerial part, at 2200 rpm for the operation
of the carriage. Minimum possible speed for the tracks.
•NORMAL: variable rpm according to the selected movement. Travel motors always with
maximum displacement, therefore medium travel speed
•FAST: variable rpm according to the selected movement. Travel motors in automatic displa‑
cement variation mode, therefore maximum travel speed.
The three speeds are selected by pressing button 5 in sequence, with a cyclical routine. The
selected speed is displayed on the screen in position 4.
BUTTON 6:
Used to access the auto service menu (see paragraph 9 Radio control service menu).
X17JR0420113 56
BOOM LIFT MODELS X17J
JLG