JLG X17J Operator Manual User Manual
Page 89
85
BOOM LIFT MODELS X17J
JLG
X17JR0420113
•
Pay maximum attention to obstacles that may collide with the various parts of the
machine during movement. Before carrying out ANY movement, make sure that
nothing can interfere with ANY part of the machine (branches, protruding parts of
buildings, etc.).
It is prohibited to introduce objects into the basket that provide high resistance to wind
pressure (e.g. large signs) even if they are within the machine’s capacity limits.
PROCEDURE FOR ROUTINE MOVEMENT OF THE AERIAL PART
•
Before moving the aerial part, make sure that:
‑ all instructions provided in this chapter have been complied with;
‑ there are no obstacles in the work area;
‑ all the conditions necessary for working at a height are met:
‑ the machine is stabilised and levelled: icon 5 shown on the display,
‑ the weight in the basket is below the maximum allowed,
‑ the radio control is positioned in the basket.
•
The aerial part can ONLY be moved from the control position in the basket.
•
Select the motor speed as required and check the selection on the display.
•
Use the distributor levers in the basket to move the aerial part of the machine according
to the instructions given in the paragraph describing the controls.
The use of the jib arm is only allowed if the working load is less than or equal to 120 kg.
ATTENZIONE
ATTENTION