JLG X17J Operator Manual - Manual (Page 17)

R EF . D ESCRIPTION LEVER DIRECTION /
MOVEMENT OBTAINED
P ICTOGRAM NEAR THE
CONTROL
1 Rotation lever
This lever allows the operator to rotate
the aerial part of the platform around the
axis of the turntable.
The alignment of the machine is indica‑
ted in pos. 6 of the radio control display
(paragraph 4.1). lever fowards:
rotates the aerial
part counter‑
clockwise
lever backwards:
rotates the aerial
part clockwise
2 First and second arm control lever
This lever allows the operator to raise or
lower the first and the second arm of the
platform.
The synchronous movement of first and
second arm always ensures the maxi‑
mum outreach during work and is obtai‑
ned thanks to the special configuration
of the system, in fact it does not depend
on the operator’s ability. lever fowards:
moves first and
second arm synch‑
ronously upwards
lever backwards:
moves first and
second arm synch‑
ronously
downwards
3 Third arm control lever
This lever allows the operator to raise or
lower the third arm of the platform.
lever fowards:
raises the third arm
lever backwards:
lowers the third arm
4 Extension arm control lever
This lever allows the operator to extend and
retract the extension arm.
lever fowards:
extends the arm
outwards
lever backwards:
retracts the exten‑
sion arm toward the
machine
5 Jib control lever
This lever allows the operator to raise and
lower the jib arm.
lever fowards:
raises the jib arm
lever backwards:
lowers the jib arm
X17JR0420113
BOOM LIFT MODELS X17J
JLG
13