JLG X17J Operator Manual User Manual

Page 66

Advertising
background image

5.6 S

WITCH TO ENABLE EMERGENCY CONTROLS

This device (1) is a valve and allows the operator on the ground to switch the controls from
the position on the basket to the emergency position on the revolving turret (2).
Turn deviator, turn clockwise the key and keep it in position, then move levers and the struc‑
ture will move.

It is strongly recommended to comply with the rule whereby the platform must not be ope‑
rated without personnel available on the ground. In fact, operation of the switch by non
authorized personnel would place the operator in the basket in the unpleasant condition of
not being able to carry out any movement and of being subjected to the movements control‑
led from the ground. If this should occur, press the emergency button and call for help, or
use the emergency descent devices.

‑ AERIAL PART HYDRAULIC DISTRIBUTOR

The hydraulic distributor is fitted with levers for the selection of the required movement, its
direction and speed. The structure can be moved by using the levers after operating the swit‑
ch.
For more information on the function of the levers located on the distributor, see paragraph
“Control position”.

X17JR0420113

62

BOOM LIFT MODELS X17J

JLG

2

1

IMPORTANTE

1

2

3

4

5

IMPORTANT

Advertising