JLG X17J Operator Manual - Manual (Page 53)

49
inactive (see photo). If the electronic board of the machine is on and the radio control is not
too far from the machine, the latter will synchronize to the receiver and will be ready for use
in about 10 seconds, while the display will show the main screen.
If the electronic board of the machine is off or the radio control
is too far from the machine, the latter will not complete the syn‑
chronization procedure and the signal search status will keep
appearing on the display.
To verify if the electronic board is on, make sure that the leds of
the receiver are on.
Once the machine and the radio control have been started, the main screen giving a general
overview of the machine status will appear. For the sake of simplicity and clarity a layout is
provided with 8 icon display positions.
Example of the main screen: Icon position diagram:
BOOM LIFT MODELS X17J
JLG
X17JR0420113