JLG X17J Operator Manual - Manual (Page 9)

Note: All of the photos and drawings in this manual have been added to simplify com‑
prehension by the reader. Your machine may differ from the photos and drawings provi‑
ded.
NORMATIVE REFERENCES
The machine was designed, built and tested in accordance with harmonised standard EN280
prA2:2009, which involves presumption of conformity with the essential safety requirements
of Machinery Directive 2006/42/EC, being a type C voluntary technical standard.
According to EN280 prA2, the platform is classified as GROUP B, as the vertical projection of
the centre of gravity of the load may exceed the overturning limit, and as TYPE 1, as travel is
only allowed with the platform at rest.
The stability tests on the machine were performed in accordance with paragraph 6.1.4.2 of
EN280, with the load test calculated in conformity with 5.2.4, with a successful outcome.
In addition what prescribed in this manual it is necessary to apply the technical requirements of
the following national/international safety standards:
‑ UNI ISO 18893
‑ ISO 16368
‑ ISO 18878
With the exception of stricter local or national regulations in the working area of the MEWP.
WARRANTY
On purchasing a JLG platform, a warranty and inspection certificate is issued that clearly
indicates the warranty terms and where any repairs or adjustments made to the machine
must be reported.
RESPONSIBILITIES
The Constructor declines all liability for any injury/damage caused to persons/objects due to
any of the reasons listed below:
• Failure to comply with the instructions given in this USER AND OPERATION
MANUAL regarding operation, use and maintenance of the machine;
• Violent or sudden actions or incorrect manoeuvres when using or servicing the machine;
• Modifications made to the structure or machine components without previous authori‑
sation from the Constructor and/or without the use of suitable equipment;
• Events outside of normal and correct use of the machine described in this USER AND
OPERATION MANUAL;
• Use of non‑original spare parts not authorised by the manufacturer.
X17JR0420113
BOOM LIFT MODELS X17J
JLG
5