JLG X17J Operator Manual - Manual (Page 18)

The emergency control position was designed to operate on the extensible structure only
for emergency operations by emergency service personnel on the ground, who must in
any case be trained and know the operation of the machine and its safety devices, as well
as for maintenance and checks before starting work.
If an operator is in the basket, it is forbidden to move the structure from the ground posi‑
tion, unless in an emergency situation (sudden operator illness, technical fault).
TRAVEL
The travel control position is not defined univocally but it is located within the area around
the machine, at a distance of minimum 1 m from the latter, and up to the limit distance
allowed by the radio signal (this data varies according to the conditions in the environment
where the machine is used).
When controlling the machine from the ground position, always make sure that the com‑
ponent that is being moved is completely visible and constantly check its trajectory.
It is absolutely forbidden to use the radio control to move the machine when this cannot
be seen by the operator.
The machine can travel only if there are no persons, animals or things in the basket.
When controlling the machine from the ground by means of the radio control, keep a
distance of at least 1 m from the tracks.
ATTENZIONE
PERICOLO
ATTENZIONE
X17JR0420113 14
BOOM LIFT MODELS X17J
JLG
ATTENTION
ATTENTION
DANGER