JLG X17J Operator Manual User Manual
Page 16
AERIAL PART EMERGENCY
There is a second control position for the aerial part which is called aerial part emergency
control position. This position is on the ground, on the side of the machine, near the aerial
part hydraulic distributor on the ground. In order to enable this control position it is neces‑
sary to use the switch located on the left side of the distributor. This control position must be
used only for emergency manoeuvres or when servicing the machine.
R
EF
.
D
ESCRIPTION
LEVER DIRECTION
/
MOVEMENT OBTAINED
P
ICTOGRAM NEAR THE
CONTROL
7
Rotation lever
This lever allows the operator to rotate
the aerial part of the platform around
the axis of the turntable.
When the machine is aligned, this con‑
dition is signalled by the two reference
arrows.
lever fowards:
rotates the aerial part
counterclockwise
lever backwards:
rrotates the aerial
part clockwise
1
2
4
3
5
X17JR0420113
12
BOOM LIFT MODELS X17J
JLG