JLG X17J Operator Manual - Manual (Page 55)

In place of this icon, the basket overload icon may be shown.
When the load sensor measures a load exceeding the allowed work load ‑ 120 kg/200 kg ‑ the
main screen disappears for three seconds, replaced by the overload error display, the audible
warning is activated, then the overload icon appears in position 5 in place of the icon ena‑
bling the overhead movements.
OVERLOAD ERROR DISPLAY
POSITION 6:
Position 6 displays the icon confirming that track movements (stabilisers, tracks, track exten‑
sion) are enabled.
This icon means that all conditions for operating the track movements have been checked.
No icon on means that the stabilisers cannot be used and the track cannot be extended. The
machine, however, can travel even when the icon is off, as long as all 4 stabilisers are lifted
from the ground.
X17JR0420113
BOOM LIFT MODELS X17J
JLG
51