JLG X17J Operator Manual - Manual (Page 109)

105
Before use, carefully read the instruction booklet.
Make sure that the charge curve selected is suitable for the type of battery being rechar‑
ged.
6.8 MAIN INTENDED USES OF THE PLATFORM
Below are the specific warnings for the most frequent uses of the machine. The information
provided must be considered as an addition to and not a replacement for the contents of the
User and Operation manual.
6.8.1 S
YSTEMS
Make sure the parts where maintenance is to be performed are not live, if in doubt request
verification from personnel on the ground.
Do not operate near power lines.
Keep a suitable distance away based on the voltage (see paragraph “Risk of electrocution”).
6.8.2 C
LOSED ENVIRONMENTS
To perform operations in closed environments the Constructor recommends the use of the
machine with electric motor; if this is not possible, make sure there is enough ventilation to
prevent the accumulation of harmful gases.
If lighting in the workplace is insufficient, additional lighting must be supplied.
6.8.3 P RUNING
This activity requires very important skills in order to prevent the machine from losing stabi‑
lity. Remember that:
‑
if branches or logs fall on the safety devices these will be broken;
‑ falling plant parts may damage the machine;
‑ falling plant parts may press the emergency button on the ground. In this case the
machine cannot be controlled and the personnel on the ground must intervene;
‑ the tools used for pruning, such as chainsaws, exert considerable force towards the out‑
side of the basket edge;
BOOM LIFT MODELS X17J
JLG
X17JR0420113
ATTENZIONE
WARNING