JLG X17J Operator Manual User Manual
Page 79
75
6.4.6 A
UTOMATIC WORKING LOAD SELECTION
The elevating platform can work with two different loads: 200 kg or 120 kg. According to the
working load selected, one of the two work areas available on the machine will be enabled.
The working load depends on the position of the jib arm. If this is completely folded the
allowable working load is 200 kg and this is indicated by an icon in position 2 on the radio
control; if the jib is not completely folded the allowable working load is 120 kg and this is
indicated in position 2 on the radio control. If the operator attempts to open the jib with
more than 120 kg in the basket an error message appears in the middle of the display.
If the allowable load limits are exceeded all aerial movements are disabled, an alarm messa‑
ge appears on the radio control and the buzzer sounds. To restore operation, the excess load
needs to be removed.
BOOM LIFT MODELS X17J
JLG
X17JR0420113