JLG X17J Operator Manual - Manual (Page 48)

The max load depends on the working mode. If the machine works with the jib open, the
load is 120 kg. In case of operation with the jib closed, the maximum load allowed is 200 kg.
The radio control display always shows the maximum load allowed according to the work
mode.
When the maximum allowable load is reached, an icon appears on the radio control display,
a sound signal is emitted and all platform movements are disabled. To restore platform ope‑
ration the excess weight must be removed in order to return below the maximum allowable
weight (see paragraph on the display).
The Constructor recommends that maximum attention is paid
to the conditions of all safety components and in particular of
the system that makes up the basket load sensor; always check
correct operation whenever objects are struck with the basket or
if performing operations that may damage the system (e.g. pru‑
ning, painting etc.).
Before any elevating manoeuvre, always make sure that the two closing covers on the ver‑
tical pins are completely screwed in.
3.8 C
ONTROL PROTECTION
A protection structure is provided to protect the radio control against the accidental fall of
objects from above and involuntary activation by the operator.
Always make sure that this protection structure is intact before using the machine.
Special protection structures and plate casings are provided to protect the control levers of
all distributors against the accidental fall of objects from above and involuntary activation by
the operator.
ATTENZIONE
PERICOLO
C
OVER
X17JR0420113 44
BOOM LIFT MODELS X17J
JLG
ATTENTION
DANGER