JLG X17J Operator Manual - Manual (Page 45)

X17JR0420113
BOOM LIFT MODELS X17J
JLG
41
3.1 B
ATTERY CUTOUT SWITCH
This device, located on the left side of the electrical components compartment, is used to iso‑
late the machine’s electrical circuit, stopping any movements.
It is well‑visible and easily accessed without using tools. It only needs to be activated for pro‑
longed machine downtime or maintenance operations.
Turning the key clockwise closes the machine’s electrical circuit, while turning it anticlockwi‑
se isolates the machine’s electrical circuit and the key can be removed.
B
EFORE DISCONNECTING THE BATTERY BY MEANS OF THIS DEVICE
,
MAKE SURE THAT THE ENGINE
KEY IS IN POSITION “ OFF ”, THE RADIO CONTROL EMERGENCY STOP BUTTON HAS BEEN PRESSED AND
THE RADIO CONTROL AND ELECTRONIC BOARD ARE OFF
.
3.2 D ISTRIBUTOR PRESSURE RELIEF VALVES
All platform distributors have a pressure relief valve that limits the pressure inside the
system to the value set for the same valve.
These valves are set when the platform is tested by qualified personnel and must not be tam‑
pered with for any reason whatsoever.
IMPORTANTE IMPORTANT
THERMIC MOTOR LITHIUM MOTOR