JLG 4013PS Service Manual - Manual (Page 24)

General Information and Specifications
2-12 3508PS, 3509PS, 3512PS, 3513PS, 4008PS, 4009PS, 4012PS, 4013PS, 4017PS, 40.8, 40.9
2.3.4 Electrical System
Note: Refer to Section 9.6, “Fuses and Relays,” for more information.
2.3.5 Engine Performance Specifications
Note: Engine manufacturer's maximum “high idle” setting is lockwired and sealed. DO NOT disturb this setting.
2.3.6 Tires
Note: Standard wheel lug nut torque is 500 Nm (369 lb-ft).
Battery
Type, Rating 12V DC, Negative (-) Ground, Limited Maintenance,
Wet Charged
Quantity 1 (100 Ah) (C
20
)
Reserve Capacity CCA @ -18° C: 880 EN
Group/Series DIN 600,38
Alternator 12V, 85 Amps
Starter 12V, 3,2 KW Type EV (Gear Reduction)
Description
Engine Make/Model Perkins 1004-40T
Low Idle 925 RPM ±50 RPM
High Idle 2340 RPM ±50 RPM
Horsepower 80,4 BHP/60 KW @ 2200 rpm
Fuel Delivery Fuel Injection
Air Cleaner Dry Type, Replaceable Primary and Safety Elements
Size Tire Type Minimum Ply Fill Type Pressure
405/70-24 MPT01 AG 14 Ply Pneumatic 4,0 Bar (58 psi)
405/70-24 MPT04 CONST 14 Ply Pneumatic 4,0 Bar (58 psi)
405/70-24 MPT01 AG (4017PS only) 14 Ply Pneumatic 4,5 Bar (65 psi)
405/70-24 MPT04 CONST (4017PS only) 14 Ply Pneumatic 4,5 Bar (65 psi)