Barco RS232 - Manual (Page 140)

3. Advanced Commands
Receive (acknowledge)
Checksum \x07
Stop \xff
Receive (awnser)
Start \xfe
Projector address \x01
Command[0] \x21
Command[1] \xa2
Data[0] \x0a
Data[1] \x00
Checksum \xce
Stop \xff
3.24 Gain Control, Increment/Decrement
Description
Increments/decrements the Gain Control value by one
Commands
increment:
Command [0] \x22
Command [1] \xa2
decrement:
command[0] \x23
command[1] \xa2
3.25 Minimum/Maximum AGC value, Read
Description
Reads the minimum/maximum AGC(Automatic Gain Control) value.
Commands
read minimum:
Command [0] \x26
Command [1] \xa2
read maximum:
Command[0] \x27
Command[1] \xa2
138 R5976884 RLM SERIES 04/04/2006