Barco RS232 - Manual (Page 74)

2. Basic Commands
Receive (acknowledge)
Command[1] \x06
Checksum \x07
Stop \xff
Receive (Answer)
Start \xfe
Projector address \x01
Command[0] \x21
Command[1] \x45
Data [0] \x00
Checksum \x67
Stop \xff
2.33 Standby Timer, Write
Description
Adjusts the Standby Timer in a range from 180 to 3600.
Command
Command [0] \x20
Command [1] \x98
Data
Unsigned word representing the standby time value:
Data[0] = msb
Data[1] = lsb
range: 180 to 3600 seconds
0 seconds = Standby timer OFF
Example
Sets the standby time to “400”
Transmit
Start \xfe
Projector address \x01
Command[0] \x20
Command[1] \x98
Data[0] \x01
Data[1] \x90
Checksum \x4a
Stop \xff
72 R5976884 RLM SERIES 04/04/2006