Barco RS232 - Manual (Page 141)

3. Advanced Commands
Returned Data
Data [0] = min/max value
3.26 Automatic Gain Control interval, Write
Description
Sets the AGC to short or long.
Command
Command [0] \x20
Command [1] \x9c
Data
Data [0] = byte type
byte value:
0 = short ; 1 = long
Example
Sets the AGC interval to “short”
Transmit
Start \xfe
Projector address \x01
Command[0] \x20
Command[1] \x9c
Data[0] \x00
Checksum \xbd
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
3.27 Automatic Gain Control Interval, Read
Description
Reads the AGC interval (short or long)
R5976884 RLM SERIES 04/04/2006 139