Barco RS232 - Manual (Page 99)

3. Advanced Commands
3.2.9 PiP save layout
Description
Saves the active PiP layout.
Command
Command [0] \x12
Command [1] \x07
3.2.10 PiP save layout as
Description
Saves a PiP layout .
Command
Command [0] \x12
Command [1] \x08
Data
strPipname = string of maximum 12 characters (including the \x00 byte)
The string is of the C-language type see chapter "1. Serial communications Basics", "Syntax", page 9
Example
Saves the active PiP layout as “test”.
Transmit
Start \xfe
Projector address \x01
Command[0] \x12
Command[1] \x08
Data[0] \x74
Data[1] \x65
Data[2] \x73
Data[3] \x74
Data[4] \x00
Checksum \xdb
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
R5976884 RLM SERIES 04/04/2006 97