Barco RS232 - Manual (Page 64)

2. Basic Commands
Receive (acknowledge)
Checksum \x07
Stop \xff
Receive (awnser)
Start \xfe
Projector address \x01
Command[0] \x21
Command[1] \x50
Data[0] \x00
Data[1] \x00
Checksum \x72
Stop \xff
2.30 Lamp commands
Overview
• Lamp Mode, Write
• Lamp Mode, Read
• Lamp Status, Read
• Lamp Warning, Read
• Lamp runtime, Read
• Lamps Serial number, Read
2.30.1 Lamp Mode, Write
Description
Writes the Lamp mode to the projector
Command
Command [0] \x20
Command [1] \x0c
Data
Data[0]: unsigned byte
data byte value: 0 = Single mode ; 1= Dual mode
Example
Write the mode
\x00(
single mode) to the projector
Transmit
Start \xfe
Projector address \x01
62 R5976884 RLM SERIES 04/04/2006