Barco RS232 - Manual (Page 34)

2. Basic Commands
Returned Data
Data [0] = minimum Saturation value
Example
Reads the minimum Saturation value of the projector, the awnser being \x00
Transmit
Start \xfe
Projector address \x01
Command[0] \x26
Command[1] \x03
Checksum \x30
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address
\x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
Receive (Answer)
Start \xfe
Projector address \x01
Command[0] \x26
Command[1] \x03
Data [0] \x00
Checksum \x30
Stop \xff
2.7.18 Maximum Saturation, Read
Description
Reads the Maximum (range) Saturation value of the projector
Command
Command [0] \x27
Command [1] \x03
Returned Data
Data [0] = Maximum Saturation value
Example
Reads the Maximum Saturation value of the projector, the awnser being
\x7f
32 R5976884 RLM SERIES 04/04/2006