Barco RS232 - Manual (Page 51)

2. Basic Commands
Transmit
Data [4]
\x2e
(=’.’)
Data [5] \x63 (=’c’)
Data [6]
\x30
(=’0’)
Data [7] \x35 (=’5’)
Data [8] \x00
Checksum \xF6
Stop \xff
Receive (Acknowledge)
Start \xfe
Projector Address \x01
Command [0] \x00
Command [1] \x06
Checksum \x07
Stop \xff
2.13 Orientation, Write
Description
Writes the orientation to the projector
Command
Command [0] \x20
Command [1] \x24
Data
Data [0] = unsigned byte
byte value:
\x00 = rear/table ; \x40 = front/table ; \x80 = front/ceiling ; \xc0 = rear/ceiling
Example
Set the orientation to front/table.
Transmit
Start \xfe
Projector address \x01
Command[0] \x20
Command[1] \x24
Data[0] \x40
R5976884 RLM SERIES 04/04/2006 49