Barco RS232 - Manual (Page 147)

3. Advanced Commands
Data
Commands Data type
total lines unsigned word (2 bytes)
active lines unsigned word (2 bytes)
line start unsigned word (2 bytes)
period unsigned word (2 bytes)
total pixels unsigned word (2 bytes)
active pixels unsigned word (2 bytes)
pixel start unsigned word (2 bytes)
clamp width unsigned byte
3.31.6 Image files settings, read
Description
These commands reads the image files characterisitics
Commands
Read total lines:
Command [0] \x21
Command [1] \x58
Read active lines
Command [0] \x21
Command [1] \x59
Read line start
Command [0] \x21
Command [1] \x5a
Read period
Command [0] \x21
Command [1] \x5b
Read total pixels
Command [0] \x21
Command [1] \x5c
Read active pixels
Command [0] \x21
Command [1] \x5d
Read pixel start
Command [0] \x21
Command [1] \x5e
R5976884 RLM SERIES 04/04/2006 145