Barco RS232 - Manual (Page 33)

2. Basic Commands
Command
Command [0] \x21
Command [1] \x03
Returned Data
Data [0] =Saturation value
Example
Reads the actual Saturation value of the projector, the awnser being
\x20
Transmit
Start \xfe
Projector address \x01
Command[0] \x21
Command[1] \x03
Checksum \x25
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
Receive (Answer)
Start \xfe
Projector address \x01
Command[0] \x21
Command[1] \x03
Data [0] \x20
Checksum \x45
Stop \xff
2.7.17 Minimum Saturation, Read
Description
Reads the minimum (range) Saturation value of the projector
Command
Command [0] \x26
Command [1] \x03
R5976884 RLM SERIES 04/04/2006 31