Barco RS232 - Manual (Page 38)

2. Basic Commands
Data [0] = msb
Data [1] = lsb
Example
Reads the minimum Tint value of the projector, the awnser being \xff\x4c
Transmit
Start \xfe
Projector address \x01
Command[0] \x26
Command[1] \x04
Checksum \x31
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address
\x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
Receive (Answer)
Start \xfe
Projector address \x01
Command[0] \x26
Command[1] \x04
Data [0] \xff
Data [1] \x4c
Checksum \x76
Stop \xff
2.7.24 Maximum Tint, Read
Description
Reads the Maximum (range) Tint value of the projector
Command
Command [0] \x27
Command [1] \x04
Returned Data
signed word :
Data [0] = msb
Data [1] = lsb
36 R5976884 RLM SERIES 04/04/2006