Barco RS232 - Manual (Page 35)

2. Basic Commands
Transmit
Start \xfe
Projector address \x01
Command[0] \x27
Command[1] \x03
Checksum \x31
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
Receive (Answer)
Start \xfe
Projector address \x01
Command[0] \x27
Command[1] \x03
Data [0] \x7f
Checksum \xaa
Stop \xff
2.7.19 Tint, increment
Description
Increments the Tint by one.
Command
Command [0] \x22
Command [1] \x04
2.7.20 Tint, decrement
Description
Decrements the Tint by one.
Command
Command [0] \x23
Command [1] \x04
R5976884 RLM SERIES 04/04/2006 33