Barco RS232 - Manual (Page 148)

3. Advanced Commands
Read clamp width
Command [0] \x21
Command [1] \x68
Returned Data
Commands Data type
total lines unsigned word (2 bytes)
active lines unsigned word (2 bytes)
line start unsigned word (2 bytes)
period unsigned word (2 bytes)
total pixels unsigned word (2 bytes)
active pixels unsigned word (2 bytes)
pixel start unsigned word (2 bytes)
clamp width unsigned byte
3.31.7 Image files settings,Increment
Description
These commands set the image files characterisitics
Commands
Increment total lines:
Command [0] \x22
Command [1] \x58
Increment active lines
Command [0] \x22
Command [1] \x59
Increment line start
Command [0] \x22
Command [1] \x5a
Increment period
Command [0] \x22
Command [1] \x5b
Increment total pixels
Command [0] \x22
Command [1] \x5c
Increment active pixels
Command [0] \x22
Command [1] \x5d
146 R5976884 RLM SERIES 04/04/2006