Barco RS232 - Manual (Page 37)

2. Basic Commands
Returned Data
signed word :
Data [0] = msb
Data [1] = lsb
Example
Reads the actual Tint value of the projector, the awnser being : \x00 \x20
Transmit
Start \xfe
Projector address \x01
Command[0] \x21
Command[1] \x04
Checksum \x26
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
Receive (Answer)
Start \xfe
Projector address \x01
Command[0] \x21
Command[1] \x04
Data [0] \x00
Data [1] \x20
Checksum \x46
Stop \xff
2.7.23 Minimum Tint, Read
Description
Reads the minimum (range) Tint value of the projector
Command
Command [0] \x26
Command [1] \x04
Returned Data
signed word :
R5976884 RLM SERIES 04/04/2006 35