Barco RS232 - Manual (Page 75)

2. Basic Commands
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
2.34 Standby Timer, Read
Description
Reads the actual Standby Timer value
Command
Command [0] \x21
Command [1] \x98
Returned Data
Unsigned word representing the standby time value:
Data[0] = msb
Data[1] = lsb
range: 180 to 3600 seconds
0 seconds = Standby timer OFF
Example
Reads the actual standby timer value, being
\x00
(Timer OFF)
Transmit
Start \xfe
Projector address \x01
Command[0] \x21
Command[1] \x98
Checksum \xba
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
R5976884 RLM SERIES 04/04/2006 73