Barco RS232 - Manual (Page 32)

2. Basic Commands
Command
Command [0] \x23
Command [1] \x03
2.7.15 Write Saturation
Description
Writes a new Saturation value to the projector
Command
Command [0] \x20
Command [1] \x03
Data
Data [0] = Saturation value
value = unsigned byte
Example
Writes a new Brightness value of
\x20
to the projector
Transmit
Start \xfe
Projector address \x01
Command[0] \x20
Command[1] \x03
Data \x20
Checksum \x44
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
2.7.16 Saturation, Read
Description
Reads the actual Saturation value of the projector
30 R5976884 RLM SERIES 04/04/2006