Barco RS232 - Manual (Page 144)

3. Advanced Commands
3.31 Image files
Overview
• Delete File(s)
• Copy File
• Rename File
• Move File
• Image files settings, Write
• Image files settings, read
• Image files settings,Increment
• Image files settings, Decrement
• Read Minimum/Maximum Image files settings
• VCO, Increment
• VCO, decrement
• VCO,write
• VCO, Read
• Minimum VCO, Read
• Maximum VCO, Read
• Charge pump current, Increment/Decrement
• charge pump current, Write
• charge pump current , Read
• Minimum/Maximum charge pump current, Read
• Clamp position, Increment/Decrement
• Clamp position, Write
• Clamp position, Read
• Minimum/Maximum clamp position, Read
• Comb filter, Increment/Decrement
• comb filter, Write
• Comb filter, Read
• Minimum/Maximum comb filter, Read
• Horizontal sync polarity, Increment/Decrement
• Minimum/Maximum Horizontal sync polarity, Read
• Horizontal sync polarity, Read
• Horizontal sync polarity, Write
• Sync locking, Increment/Decrement
• Minimum/Maximum Horizontal Sync locking, Read
• Sync locking, Read
• Sync locking, Write
3.31.1 Delete File(s)
Description
This command deletes a list of image files from the projector.
Wildcards can be used to specify the filenames.see chapter "1. Serial communications Basics", "Syntax", page 9
Command
Command [0] \xc1
Send Data
strFilename1
...
strFilenameN
142 R5976884 RLM SERIES 04/04/2006