Barco RS232 - Manual (Page 62)

2. Basic Commands
2.26 Full screen representation(ON/OFF), Write
Description
Enable/disables the full screen representation
Command
Command [0] \x20
Command [1] \xae
Sent Data
Data[0] : one byte : 0 = OFF ; 1 = ON
2.27 Full screen representation (ON/OFF), Read
Description
Reads whether the Full screen representation is enabled or not
Command
Command [0] \x21
Command [1] \xae
Reaturned Data
Data[0] : one byte : 0 = OFF ; 1 = ON
2.28 Keystone, Write
Description
Adjusts the keystone
Command
Command [0] \x20
Command [1] \x50
Data
Signed word representing the keystone value.
Data[0] = msb
Data[1] = lsb
Example
Sets the keystone to “0”
Transmit
Start \xfe
Projector address \x01
Command[0] \x20
Command[1] \x50
Data[0] \x00
60 R5976884 RLM SERIES 04/04/2006