Barco RS232 - Manual (Page 43)

2. Basic Commands
Transmit
Start \xfe
Projector address \x01
Command[0] \x27
Command[1] \x70
Checksum \x98
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
Receive (Answer)
Start \xfe
Projector address \x01
Command[0] \x27
Command[1] \x70
Data [0] \x1c
Checksum \xb4
Stop \xff
2.7.31 Phase, increment
Description
Increments the Phase by one.
Command
Command [0] \x22
Command [1] \x06
2.7.32 Phase, decrement
Description
Decrements the Phase by one.
Command
Command [0] \x23
Command [1] \x06
R5976884 RLM SERIES 04/04/2006 41