Barco RS232 - Manual (Page 88)

2. Basic Commands
Command [0] \x27
Command [1] \x4f
Sent Data
byTypeBlanking : one byte describing the type of blanking
Data [0] = 0 : blanking on image file (saved in image file)
Data [0] = 1 : blanking on display
Returned Data
byTypeBlanking : one byte describing the type of blanking
Data [0] = 0 : blanking on image file (saved in image file)
Data [0] = 1 : blanking on display
Unsigned word (2 bytes) representing the maximum value to be used for blanking.
Data [0] = msb
Data [1] = lsb
The maximum number of pixels which can be blanked depends on the native resolution of the panels
86 R5976884 RLM SERIES 04/04/2006