INFICON MDC-360 Thin Film Deposition Controller - Manual (Page 157)

MDC-360 DEPOSITION CONTROLLER
power through the Remote Power b) Controller is in Abort mode.
c) Faulty Remote Power Handset.
d) Bad connection from the Manual
Control connector to the Main bd.
Handset.
Faulty DAC outputs. a) Improper DAC wiring.
b) External recording device puts
excessive load on the DAC.
For further assistance, call (562 906-1515.
12.4 RETURNING THE MDC-360 TO THE FACTORY
to return your ontroller to the factory, please call Maxtek to
erchandise uthorization Number (RMA#). This number is
your controller to the factory. You are required to
ou shipping document. It will help us track and
ensure proper actions will be m de to your controller.
)
If there is a need c
obtain a Returned M A
required prior to returning
show this RMA number on y
r
a
REPAIR AND MAINTENANCE 12-3