3 configuring the host system (master), Configuring the host system (master) – Lenze E82ZAFPC010 User Manual
Page 36
Advertising
![background image](/manuals/565878/36/background.png)
Commissioning
Configuring the host system (master)
l
36
EDS82ZAFPC010 EN 4.0
6.3
Configuring the host system (master)
The host must be configured before communication with the communication module is
possible.
Master settings
For configuring the PROFIBUS, the device data base file (GSE file) of the communication
module has to be imported into the configuring software of the master.
I
Tip!
The GSE file can be downloaded from www.Lenze.com.
Advertising
This manual is related to the following products: