3 assembly of analog plug-in module, Installation – Lenze 8240 HVAC Series User Manual
Page 27
Advertising
Installation
4-3
UOOuhäáã~_^NMMO
4.1.3
Assembly of analog plug-in module
hPRKMNQNd_
F r o n t v i e w
S i d e v i e w
8 2 7 9
cfd QJO
^е~дзЦ éäìÖJáå гзЗмдЙ ЗбкЙЕнду гзменЙЗ зенз нЬЙ ЕзенкзддЙк
Assembly
D
qЬЙ ~е~дзЦ éäìÖJáå гзЗмдЙ бл йдмЦЦЙЗ зенз нЬЙ кбЦЬн нЙкгбе~д лнкбй
EíÉêãáå~äë OM KKK PVFK
D
qЬЙ мебн кЙимбкЙл QM гг гзкЙ ~ллЙгДду ÇÉéíÜK
Step
What to do
1.
Remove the socket connector possibly attached to terminals 20 ... 39.
2.
Connect the analog plug-in terminal to the terminals 20 ... 39.
3.
Plug the socket connector in the terminals strip of the analog plug-in module (the plug-in modules
serves as intermediate adapter).
4.
Connect the analog input to the terminals E1 and 39 of the socket connector.
Show/Hide Bookmarks
Advertising
This manual is related to the following products: