Lenze 8240 HVAC Series - Manual (Page 55)

Commissioning
5-15 UOOuhäáã~_^NMMO
`зЗЙ лЙннбеЦл J мебн OW
Code Name Possible settings
Lenze
Selection Info
C001 Operating mode -0- -0- Setpoint selection via term. 8. Control via
terminals. Parameter setting via 8201BB
C005 Configuration -0- -0- Operation with open-loop control via terminal 8
C014 Operating mode -0- -3- Square characteristic V~f
d
2 with constant
V
min
boost
According to the information given in both tables (code setting for unit 1 and 2):
1. All other parameters are based on the factory setting.
2. Set the rated motor data (depends on the motor used) under C088 (rated motor current) and C091 (motor cos φ).
Show/Hide Bookmarks