Lenze 8240 HVAC Series - Manual (Page 67)

Configuration
7-3 UOOuhäáã~_^NMMO
Code IMPORTANT Possible settings Name Code IMPORTANT
Info Selection Lenze
Name
C003 ¿ Save parameter
set
-1- -0- Data will not be saved on EEPROM; all data
will be lost when switching off the mains
-1- Data will be saved on EEPROM; setting
when switching on the mains
-0- only valid for
C010, C011, C012,
C013, C037, C038,
C105, C181 and
C182
C004 ¿ Switch-on display -0- -0- Field frequency f
d
-1- Unit load
-2- Motor current
C005 ¿ Configuration -0- -0- Operation with open-loop control via
terminal 8
-1- Operation with open-loop control via
terminal 8 with setpoint summation via
frequency input E1
-2- Operation with open-loop control via
frequency input E1 with setpoint
summation via terminal 8
-3- Operation with open-loop control via
frequency input E1 with torque limitation
via terminal 8
-4- Torque selection via terminal 8 with speed
limitation via f
dmax
(C011)
-5- Torque selection via terminal 8 with speed
limitation via frequency input E1
-6- Operation with closed-loop control; setpoint
via terminal 8 with digital frequency
feedback via terminal E1
-7- Operation with closed-loop control, setpoint
via frequency input E1 with analog
feedback via terminal 8
Selections -4- and
-5- are only
permitted for
motor-current control
(C014 = 4) and with
activated flying
restart circuit
(C142 = 2, 3).
C007 ¿ Terminal
configuration
-0- E4 E3 E2 E1
-0- CW/CCW DC brake JOG1/2/3
-1- CW/CCW PAR JOG1/2/3
-2- CW/CCW QSP JOG1/2/3
-3- CW/CCW PAR DC brake JOG1
-4- CW/CCW QSP PAR JOG1
-5- CW/CCW DC brake Trip set JOG1
-6- CW/CCW PAR Trip set JOG1
-7- CW/CCW PAR DC brake Trip set
-8- CW/CCW QSP PAR Trip set
-9- CW/CCW QSP Trip set JOG1
-10- CW/CCW Trip set UP DOWN
D
CW =
CW rotation
D
CCW =
CCW rotation
D
DC brake =
DC injection brake
D
PAR =
Change of
parameter sets
D
JOG =
JOG frequency
D
QSP =
Quick stop
Show/Hide Bookmarks